BALSA SHOPPING

[Mezri]

Hello,
Please, Im Asking from where can we get Balsa 1/32, good Qty at a reasonable prises.
Thank You.

[Sempai-mj]

Perhaps:

https://www.amazon.ca/Unfinished-Basswood-Plywood-Project-5-9x3-94x0-059/dp/B09S9T96T3/ref=asc_df_B09S9T96T3/?tag=googleshopc0c-20&linkCode=df0&hvadid=578924462396&hvpos=&hvnetw=g&hvrand=2029503404136536339&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9000614&hvtargid=pla-1657433972399&psc=1

[Andrew Fernie]

I can’t see how it makes sense to order from AliExpress and get it shipped from China, but maybe it does. At least if you can survive with 500mm long stock


C$ 14.18 13? Off | 10pcs 500x100x0.75/1/1.5/2/2.5/3/4/5mm EXCELLENT QUALITY Model Balsa wood sheets for DIY airplane boat model material
https://a.aliexpress.com/_m0XTEg2

[Mezri]

Thank You Guys, 36'' is the minimum lenght...aliexpress and others are cuting even the beautiful carbon tubes on half (500mm)...it is useless for building airplanes :(

[Ronald Longtin]

J’ai beaucoup de stock. Tu cherche quoi exactement.

[MichaelLevy]

I have 11 sheets of 1/32 balsa, 3 in. W by 36 in. L.

[Mezri]

Thank You Ronald, Thank you Michael...I think I will need 1mm thinkness (1/32 is a bit week, and 1/16 is more than needed (30% heavier))...10cmx1m (4''x40'') a round 40 sheets...The 3m wing span is really demanding :D wing with elevator rudder and fuselage...Im still planning for it...to buy in a few monthes. So Im searching.