Timber wheels

[Dougf]

Anyone have a spare set of main gear wheels they want to sell? After a bunch of lousy landings mine are toast and need to be replaced. Thanks

[Krish]

Hi there, I am Krish and do not have any wheels for a Timber as I just ordered a Turbo Timber, just wondering how do you like it. It is my first venture into the world of electrics as I am a very old timer making the move. I get it tomorrow and will fly it during the next week and would like to talk to someone that is familiar with it, if you don't mind. I hope to fly it at the fun fly as well!

[Jdonald]

Hi Krish. The Turbo Timber comes setup from the factory to perform with a 3S or 4S lipo battery. Flys best with a 4S battery and the factory 3 blade prop. Will fly with a 3S but has less thrust. If you will be using only a 3S change the prop to a 13 x 6.5E. But do not use a 4S with the 13 X 6.5 or you could over heat the ESC. As for C.G. I have the 3S3200 and the 4S3200 all the way at the rear of the battery compartment. If using a 3S2200 or 4S2200 I have the batteries about an inch to 1.25 inches back from the front of the battery compartment. Hope this is useful. If you have any questions about setting up "Safe Select" just let us know.

[Krish]

Any and all inputs are appreciated. I am looking at my unopened Turbo Timber box I picked up yesterday at Teds. I wanted an additional 3S3200 but he did not have stock so settled for a 3S2200. I also brought a 4S2200 back with me as well as a 6 channel receiver that I already bound to my TX flight mode (modified mode 2). I plan to assemble over the weekend and hopefully be at field during the week. Your CG suggestions will be my starting guide, Thanks. I have no plan for the skis...yet.