Spring Thread starter

[Sempai-mj]

Who's getting a new plane for the 2019 Summer session?

I'll Start, This one reminds me of the dog fighter.
Features:
• 100mph+ performance right out of the box (on 4S set-up).
• High-quality AeroStar Brushless Motor and ESC
• Powerful and fast 9g digital servos.
• Supplied with 8x6 propeller for 3S and 7x6.5 propeller for 4S set-ups.
• Super Compressed EPO foam construction.
• Glass and carbon fiber reinforcement throughout the airframe.
• No glue assembly. Just clicks and screws together in minutes.
• Ball link control system.
• Full complement of spare parts available.

Specs:
Wingspan: 1100mm (43")
Length: 760mm (30.2")
Flying weight: 910g (32oz)
Motor: AeroStar 3536 1780KV Brushless Outrunner
Prop: 8x6 (3S) and 7x6.5 (4S) supplied
Servos: 4 x 9g digital servos (metal geared on ailerons)
ESC: AeroStar 60A
Controls: 4 Channel (Throttle, Ailerons, Elevator, Rudder)

Requires:
6 ch receiver and transmitter
1800mah 14.8V 4S Lipo Battery (30C min) on 7" prop - 2200mah 11.1V 3S Lipo Battery (30C min) on 8" prop

[Jdonald]

It is a great looking plane. Specs indicate strong rigid frame. I was looking at the dog fighter last night on line but it appears to be discontinued. Nice size to fit in the back seat of a car. Thanks for sharing. I need to study why with a 4s battery a smaller prop is used. Not the first time I've noticed this. Perhaps it is due to current draw and the esc.

[mitea_dan]

Pour moi:
http://www.benbucklevintage.com/index.php?main_page=product_info&cPath=1_7&products_id=32

[Ricardo]

Who's getting a new plane for the 2019 Summer session?

I'll Start, This one reminds me of the dog fighter.
Features:
• 100mph+ performance right out of the box (on 4S set-up).
• High-quality AeroStar Brushless Motor and ESC
• Powerful and fast 9g digital servos.
• Supplied with 8x6 propeller for 3S and 7x6.5 propeller for 4S set-ups.
• Super Compressed EPO foam construction.
• Glass and carbon fiber reinforcement throughout the airframe.
• No glue assembly. Just clicks and screws together in minutes.
• Ball link control system.
• Full complement of spare parts available.

Specs:
Wingspan: 1100mm (43")
Length: 760mm (30.2")
Flying weight: 910g (32oz)
Motor: AeroStar 3536 1780KV Brushless Outrunner
Prop: 8x6 (3S) and 7x6.5 (4S) supplied
Servos: 4 x 9g digital servos (metal geared on ailerons)
ESC: AeroStar 60A
Controls: 4 Channel (Throttle, Ailerons, Elevator, Rudder)

Requires:
6 ch receiver and transmitter
1800mah 14.8V 4S Lipo Battery (30C min) on 7" prop - 2200mah 11.1V 3S Lipo Battery (30C min) on 8" prop

That will be a " hot rod" ... Cant wait to see it fly...

[Ricardo]

I will get my first DLG...

I will also try to cut a Zagi Wing.

Other than that, my challenge is to get at least 5 of my airplanes flying regularly during the season....

[LucT]

Salut Michael,

I will bring my brand new Twisted Hobbies 48'' EPP Extra 300 Blue (https://twistedhobbys.com/rcf-48-epp-extra-300-blue/).

J'ai trop hâte! :)

[Florin]

Big plans for me this year :)
I will maiden soon my glider (https://hobbyking.com/en_us/phoenix-2000-epo-composite-r-c-glider-pnf.html?___store=en_us)(once I put skis on it or maybe snow will melt first)

Then I plan to design for Cura and 3D print my dream plane (http://members.iinet.net.au/~ninelima/rv8a/)

For the summer, I hope to be experienced enough to maiden my Cherokee (http://www.greathobbies.com/productinfo/?prod_id=GPMA1033)(it sits in the box since two years now)