New Dynan DHC-2 Beaver

[bailey]

Hey Richard, I see you have a new project. What do you think of Dynan products? I bought a 1500mm (59" wingspan) Beaver complete with floats. I will need some help regarding what to buy for a receiver. It has a 50A ESC Brushless with a T connector. It also has a BM 3720A-KV 650 Brushless Outrunner Motor. I have ordered a 4S 14.8V 2200mAH 25c battery which I should have shortly. The plane has lights also which I will need so advice on how to hook them up. Other than that I think I can fly it. Seems to be really stable in air and a real peach to fly. Any help I can get would be appreciated.

[Burning Head]

Nice acquisition Wayne :) https://www.youtube.com/watch?v=WctitFJ9OEY Flaps are optional but still highly recommended from smooth landing. Don't worry about the Dean plug, I have few lipo adapter (dean to tx60 yellow) I also have a extra HK servo reverser for free, https://hobbyking.com/en_us/turnigytm-servo-signal-reverser.html if plan to add flaps. I use one in my Cessna Citation

[bailey]

Thanks for the info and suggestions Richard. I have to tell you that both wings were slightly damaged and warped in transit even though it was very well packed. I sent Banggood an email complete with pic's and I received a pleasant reply last night from them informing me that they are sending me new wings. I should have them in a couple of weeks. Meanwhile thanks to my wife's little pin jar and some glue and ingenuity I was able to repair the damaged ones fairly well. So I won't do light hook up until I get the new ones. As for the flaps they sent me the necessary hardware to do the task in the original delivery.