View Full Version : Skymule project
PaulG-rc
2014-10-31, 11:28 AM
Hi Guys
For those who have seen the HK Durafly Skymule lately well I got myself one and decided to really modify it.
Here is a link to my close build thread for now.
http://www.rcgroups.com/forums/showthread.php?t=2266837
Burning Head
2014-10-31, 11:59 AM
Great inovation and work with both control fix inside the fuselage:cool:
Kevin Rochon
2014-10-31, 08:07 PM
As usual it's going to be a MASTERPIECE !
:cool:
dhamultun
2014-11-04, 07:51 PM
Nice work Paul! Can't wait to see it in the air!
PaulG-rc
2014-11-07, 10:18 AM
Nice work Paul! Can't wait to see it in the air!
Thanks guys but it will only fly next summer anyway.
PaulG-rc
2014-11-07, 10:19 AM
This morning I got to do a fair amount of work on the wing.
I got the flaps done and the light system except for the belly beacon.
Nothing is glued yet until I have the aileron servos in and adjusted.
When done my ailerons will droop done with take-off flap position like the real Beaver and twin otters.
https://www.youtube.com/watch?v=M5l48DDq1JE
MichaelLevy
2014-11-07, 01:50 PM
It looks very nice Paul. Personally, I find the Skymule butt-ugly, but your have transformed it into a plane with class.
PaulG-rc
2014-11-07, 02:56 PM
It looks very nice Paul. Personally, I find the Skymule butt-ugly, but your have transformed it into a plane with class.
Merci Michel :D:D
Kevin Rochon
2014-11-07, 08:24 PM
Hey Paul what light system do you use?
PaulG-rc
2014-11-07, 09:39 PM
Hey Paul what light system do you use?
I use the Flyzone Beaver light set and also I had ordered little beacon lights made for rc police cars and I use the module to control the tail red and white beacon,plus another little module I had for the second tail white beacon.
I still have to install a belly beacon and I have 3 other module type to choose from but I want to get another 10mm super bright LED for it.
Now I'm thinking of making my landing lights activated with my Flaps and have them pulse or Wig-Wag
PaulG-rc
2014-11-11, 11:24 AM
finally got my Flaps and Ailerons working on my Skymule Mod
Showing here my Skymule 3 position Flaps and aileron droop setup.
I use 2 switches
Position #1 Take-off flaps with aileron droop
Position #2 Flap 2 ailerons up
Switch #2 Full Flaps and ailerons still up.
Now from there I can select position #1 take-off flap on switch #1 and aileron go in a droop mode with the full flaps.
https://www.youtube.com/watch?v=jlGq3Yxg7cw
Kevin Rochon
2014-11-11, 08:40 PM
Nice Paul but not 80° like my Bigfoot (I just got to remember to keep the power up :rolleyes:)
PaulG-rc
2014-11-11, 09:03 PM
Nice Paul but not 80° like my Bigfoot (I just got to remember to keep the power up :rolleyes:)
Actually I do have 80 deg at full flaps :D
You can it a bit better here
dhamultun
2014-11-15, 11:12 AM
Looking good Paul. Which transmitter are you using? Love the voice prompts for the different settings!
PaulG-rc
2014-11-16, 04:54 PM
Looking good Paul. Which transmitter are you using? Love the voice prompts for the different settings!
I'm using the Spectrum DX9 :)
Burning Head
2014-11-17, 07:25 PM
HK sould start the V2 of the Skymule and use all Paul's mod:cool:
PaulG-rc
2016-02-08, 01:24 PM
Update on my project, got a bit of motivation to do some more on it :D
I installed the motors and ESC's in the nacelles then installed the nacelles to the wing.
Did some finishing touches under the wing and around the nacelles.
Then I programed the differential thrust on my DX9 and that took lots of thinking and trial and errors but its done and working really good.
At first I wasn't sure how to go about it but I was thinking about the flapperon setup and thought it had to be similar.
It takes 3 mixes but you still need a command to fine tune one motor so again more thinking and decided to use a knob and control the slave motor.
Then I hit the throttle cut and only one motor would stop so again more thinking so I had to make another mix assigned to the throttle cut switch and it finally worked
So if I want the differential to taxi I flip a switch and by using the rudder stick I control one motor at a time and once I'm ready for take off I flip the switch to make sure the differential is off in case I need to use rudder on take-off and that could be disastrous :eek::D
Video here
https://www.youtube.com/watch?v=x6LwkwPyQo8
My build thread here
http://www.rcgroups.com/forums/showthread.php?t=2266837
This morning did the first coat of paint on the floats.:)
dhamultun
2016-02-08, 07:10 PM
Really cool! Hope to see it in action.
Sent from my iPhone using Tapatalk
PaulG-rc
2016-02-08, 07:18 PM
Really cool! Hope to see it in action.
Sent from my iPhone using Tapatalk
Me too David :D
Tarek Hassoune
2016-02-09, 06:15 AM
Very nice Paul it's cool to see how plain turns by using the motors good job
PaulG-rc
2016-02-09, 06:18 AM
Very nice Paul it's cool to see how plain turns by using the motors good job
Yes , I always wanted to try that with a twin and no more water rudder headakes :D
Burning Head
2016-02-09, 08:26 AM
:cool:Super résulta Paul, perfect for some water drifting before the take off
PaulG-rc
2016-02-09, 08:29 AM
:cool:Super résulta Paul, perfect for some water drifting before the take off
Drifting ! :D:D:D
Mezri
2016-02-09, 08:52 AM
Hi, do you thing a resverse power is possible...?!!:FLIPOVER:
In this case i always thought about the car ESC...same one use it ?!!?:confused:
PaulG-rc
2016-02-09, 08:56 AM
Hi, do you thing a resverse power is possible...?!!:FLIPOVER:
In this case i always thought about the car ESC...same one use it ?!!?:confused:
I guess it would be possible with car or boat ESC's
Mezri
2016-02-09, 09:38 AM
Yes,... but no boat esc's : because of no cooling during the flight...
PaulG-rc
2016-02-09, 09:43 AM
Yes,... but no boat esc's : because of no cooling during the flight...
You would really have to run your ESC's really hot to have problems.
Inside a boat they are closed in tight and they get hot so they need extra cooling
PaulG-rc
2016-09-19, 06:26 PM
A small video of the first flight of my modified Durafly Skymule that I now call my SkyOtter :^)
The test flight was done using 2 rhinos 3s1p 2250 mah 45c lipos in parallel.
The CG was at 55mm from leading edge with a tad nose dip.
The flight was very stable.
Take-Off was done with 10 deg flaps and 5 deg aileron droop and keeped on the flyby and landing.
I had to take-off with the Throttle differential activated to maintain a good track and turn off once airbone.
Very happy with the performance.:)
https://www.youtube.com/watch?v=OFCWJ2aComo
and pictures
https://goo.gl/photos/eFjKAnFKXzyFB4F57
Paul
Sempai-mj
2016-09-19, 10:05 PM
Nice pics, wow lots of power on take off!:)
PaulG-rc
2016-09-19, 10:14 PM
Nice pics, wow lots of power on take off!:)
Yes .......twin turboprop :D:D
jeanyul
2016-09-20, 12:16 PM
Bravo Paul il est fantastique avoir voler cet avion je peut dire que tu a fait une superbe job
Bravo
Jean
PaulG-rc
2016-09-20, 05:58 PM
Bravo Paul il est fantastique avoir voler cet avion je peut dire que tu a fait une superbe job
Bravo
Jean
Merci Jean :)
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.