HobbyCity FASST Futaba receivers.

[beto9]

Did anyone buy them (so cheap!, 8 channels) and tested them?

I got one and connected to some servos and seem to work. The reviews are good.

http://rcmodelreviews.com/fasst_compatible_review.shtml

[mdauth]

I bought tree, I've been using them on my foam plane. no issues up to now.

[Sempai-mj]

I purchased one and flew it 3 times, no problem, if you have high speed servos disable the failsafe in the transmitter if you get servo jitters.

[Mick]

Is there a failsafe on the receiver?

[Sempai-mj]

Here's what the instructions say:


2.1 Bind procedure:


Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. After the RED LED is off and GREEN LED is solid, the binding process is completed and working mode is activated.

2.2 Setting failsafe:


TF series receivers support failsafe function for all channels. Please kindly follow the steps below to set failsafe:
1) Bind the receiver first, and disable failsafe on the transmitter side;
2) Set failsafe at any required position on any channel;
3) Press briefly the F/S button of the receiver, the GREEN LED of the receiver will flash twice, indicating the failsafe is set up successfully.


If you do not need the failsafe function any more, just re-bind the receiver to set default failsafe mode.


Warning: Due to different failsafe settings between transmitter and FrSky TFR8, users must disable
failsafe on the transmitter side. Otherwise you will notice a jitter during a period of time on the channel you set failsafe.

Here's the website for it:
http://www.frsky-rc.com/ShowProducts.asp?id=39:3eyes:

[beto9]

Thank you guys...;)

[Burning Head]

What is the small indoor receiver from Futaba but like the 6110 from Spectrum on this link http://www.greathobbies.com/search/results/ Aleksey looking for one but I am not shure:o thanks

[Burning Head]

I Got it:D