View Full Version : DA 100 prop bolts
Dwight Macdonald
2009-11-01, 11:17 PM
Does anyone know where the best place is to get prop bolts for a DA100 ... preferably in the Montreal area. The ones in my engine seem to be metric:
length = 5.5 cm long
diameter = 5.0 mm
thread pitch = 12.5 threads per cm.
Xavier
2009-11-01, 11:35 PM
I believe these places have metrics:
Attaches Richard Inc (Les)
1409, Rue Bergar,
Laval, QC H7L 4Z7
450-975-4554
Dematec Distributions Inc (Les)
6505, boulevard Henri-Bourassa Ouest,
Saint-Laurent, QC H4R 1C8
514-333-3020
Kevin Rochon
2009-11-02, 02:52 PM
way back I got mine at
Metrican
1220 RUE MICHELIN
Laval, QC H7L 4R3
(450) 629-6900
kevin
Dwight Macdonald
2009-11-13, 12:54 AM
And the winner is ...
Dematec Distributions Inc (Les)
6505, boulevard Henri-Bourassa Ouest,
Saint-Laurent, QC H4R 1C8
514-333-3020
The exact bolts with same quality of steel ... $55 for a box of 100 ... now I can change them every year or so to be safe. If anyone needs some let me know ... I have a a few extras!
Sure, I could use some, don't think the bolts that came with my DLE-111 will survive forever, they feel lightweight...
beto9
2009-11-13, 10:59 AM
http://www.minibolt.com/onlinestore/index.php?cPath=21_32&sort=2a&page=3
http://www.microfasteners.com/catalog/products/METSCMS.cfm
Michael V
2009-11-13, 05:00 PM
Put me down for 18 :)
Andrew Fernie
2009-11-13, 07:04 PM
Dwight,
Is it considered good practice to replace the bolts regularly due to fatigue?
Andrew
Dwight Macdonald
2009-11-13, 10:39 PM
It makes sense to me to replace the bolts regularly ... mine lasted about 450 flights + whatever the previous owners put on it. There are some reports of bolts breaking due to an overheated hub melting a composite prop slightly and loosening the bolts but this seems to be only on a 3W 106. http://www.rcuniverse.com/forum/m_4186247/mpage_1/printable.htm
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.